X20-205-362 with NSN 5930001538310 of Bofors Ab - Request A Quote

Part Number:  X20-205-362
Alternate P/N:  X20205362
Manufacturer:  bofors ab
NIIN:  00-153-8310
Item Name :  switch rotary
CAGE Code:  S3715
FSC:  5930 Switches
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  02134
Country:  USA
NCB Code:  00
We’re pleased to announce that part number X20-205-362 is now available and in stock. This is a Switch Rotary with NSN 5930-00-153-8310 manufactured by Bofors Ab. You can now request a near instantaneous quote for part number X20-205-362, just fill out the Request for Quote (RFQ) provided here to get started.


As you fill out the RFQ for X20-205-362, make sure that all fields, especially the asterisk-marked ones like Need Parts By and Quantity (ea), are completely filled out. Our sales team will be using your response to these fields in order to understand your requirements and calculate your quote accordingly. And they will contact you with your final quote within 15 minutes or less.  

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for X20-205-362

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

ASAP Part Services, owned and operated by ASAP Semiconductor, is an experienced and leading distributor of obsolete and hard-to-find aviation and electronic parts in the United States. We are an AS9120B, ISO 9001:2015, and FAA AC 0056B certified member of the Aviation Suppliers Association (ASA). Our vast and comprehensive inventory has more than 2 billion unique parts sourced from over 5000 industry-leading manufacturers like Bofors Ab from around the world. And we can ship the part like X20-205-362 to you with same-day or next-day shipping thanks to our shipping centers in California.

For any questions or concerns, feel free to call us at +1-714-705-4780, or email us at sales@asap-partservices.com. We’re always available and ready to help, 24/7x365. And if you’re interested in a faster and more convenient purchasing platform.

NSN Information for Part Number X20-205-362 with NSN 5930-00-153-8310, 5930001538310

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-153-8310

Item PartTypeName:

SWITCH,ROTARY

59300015383100P
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
ST6630C015-31151CA

Characteristics Data of NSN 5930-00-153-8310, 5930001538310

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A SINGLE MOUNTING FACILITY
AASATHREAD LENGTH0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONEXPLOSION PROOF
ABHPOVERALL LENGTH2.427 INCHES MINIMUM AND 2.755 INCHES MAXIMUM
ABNBFIRST FLAT LENGTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR
ABNCFLAT HEIGHT0.215 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR
ABXFSHAFT LENGTH0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR
ADAVOVERALL DIAMETER1.100 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
AFBHINDIVIDUAL SECTION QUANTITY3
AFDCNONTURN DEVICE TYPESLOTTED BUSHING AT 3 00 OCLOCK
AFGAOPERATING TEMP RANGE-65.0 TO 125.0 DEG CELSIUS
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
AKPXPOLE QUANTITY1 EACH SECTION FRONT
AKPYTHROW QUANTITY12 EACH SECTION REAR
AXGYMOUNTING METHODTHREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.375 INCHES SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS115.0 AC AT SEA LEVEL
CQMKCONTACT VOLTAGE RATING IN VOLTS28.0 DC AT SEA LEVEL
CQRQSHAFT FLAT/SLOT ANGULAR LOCATION195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
CQTHROTOR THROUGH CONNECTION QUANTITY1 EACH SECTION
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY12 SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,FLATTED SINGLE ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
CSHWCONTACT SWITCHING ACTIONBREAKS BEFORE MAKES EACH SECTION REAR
CSLCSWITCH ACTUATOR POSITIONING INCREMENT30.0 DEGREES SINGLE ACTUATOR
CSMWDETENT ROTATIONAL TORQUE RANGE0.200 TO 2.500 INCH-POUNDS SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING1.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CTHFCONTACT LOAD CURRENT RATING2.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD AC AT SEA LEVEL
STYLSTYLE DESIGNATORTAP,CIRCULAR,BUSHING MOUNT
TESTTEST DATA DOCUMENT81349-MIL-S-3786 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509020 (NAICS 335931) Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 15b2--1
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications and Memberships


Submit an RFQ Form and Get an Interactive Online Quote

Thanks for Visiting ASAP Parts Services!

Remember Us the Next Time You’re Looking for NSN Parts. We Can Get You Some of the Quickest and Most Competitive Quotes In the Industry.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top